4203 Industrial Dr, Roxana IL 62084
A TRUE GEM FOR SOMEONE WHO NEEDS A BUILDING SET UP FOR AN INDUSTRIAL APPLICATION AND NEEDS IT NOW!
Modern fairly new alarmed 50ft Wide by 100ft Long 5000 sqft warehouse with 24 foot clear span building height with 300 sq ft of office space. Built with efficient 3 zone radiant heat where hot water is pumped through tubing in concrete floors to heat the building economically saving you on your heating costs. The system is backed up by a forced air overhead warehouse heater so if one system fails the other will take its place.
Warehouse has terrific access using TWO Man Doors, FOUR-14ft X 14ft Garage Doors with Remotes which allow immediate open and closing of overhead doors from forklift to reduce heat loss.
Building also has a well laid out productive dock area with 2 lane depressed ramp allowing forklift to drive into van trailer from ground level.
Building also comes with a KAESER ASD40T Rotary Screw Compressor 40 HP Rated at 191CFM perfect for many different types of industry requiring compressed air.
Superior Efficiency
With Kaeser's one-to-one drive, the airend is directly connected to the motor via a maintenance-free coupling that eliminates transmission losses. Kaeser’s direct drive screw compressors deliver outstanding performance and increase energy savings. Kaeser uses oversized airends specifically selected to produce the required output in flow and pressure. Compared to compressors using small, high-speed, gear-driven airends, the one-to-one drive provides significant savings.
Compare Compressor Efficiency with CAGI Data Sheets
Energy efficiency has been tested and confirmed by an independent laboratory as part of the Compressed Air and Gas Institute's Rotary Screw Compressor Performance Verification Program. Kaeser compressors are up to 30% more efficient than some competitors' models.
The energy-saving Sigma Profile airend
Single-stage, flooded rotary screw airends deliver pressures up to 217 psig and feature the power-saving Sigma profile design. Airends are precision-machined and optimized in size and profile to match the airend speeds with their best specific performance. Unlike the competition, Kaeser Compressors makes many different airends so that we can apply them at their optimal speed and performance.
Energy-saving one-to-one drive
The motor is directly connected to the airend with a one-to-one coupling, providing maximum transmission efficiency. This true direct drive eliminates complex gear drive components, along with heat and power losses. It is also maintenance-free, increasing reliability and uptime.
Sigma Control 2
The compressor control system features an industrial-based PC with update capabilities, Intel® microprocessor, and real-time operating system. Pre-loaded control profiles are available to precisely match compressor performance to air demand. A convenient SD card slot enables easy software upgrades and stores key operational parameters to minimize service costs, provide back-up capabilitiy, and offer long-term data storage for trending and analysis purposes.
Premium efficiency drive motor
Super premium efficiency TEFC motors with class F insulation for extra protection from heat and contaminants. 460 or 575V 3-phase, 60 Hz. Other voltages are available.
Split cooling design
Two separate cooling air inlet zones for the coolers and drive motor ensure optimum cooling. Drawing ambient air directly across the coolers and motor through separate zones eliminates pre-heating and results in longer lubricant life and a cooler running motor. This also results in much lower approach temperatures, improving moisture separation and air quality.
With Kaeser's one-to-one drive, the airend is directly connected to the motor via a maintenance-free coupling that eliminates transmission losses. Kaeser’s direct drive screw compressors deliver outstanding performance and increase energy savings. Kaeser uses oversized airends specifically selected to produce the required output in flow and pressure. Compared to compressors using small, high-speed, gear-driven airends, the one-to-one drive provides significant savings.
Compare Compressor Efficiency with CAGI Data Sheets
Energy efficiency has been tested and confirmed by an independent laboratory as part of the Compressed Air and Gas Institute's Rotary Screw Compressor Performance Verification Program. Kaeser compressors are up to 30% more efficient than some competitors' models.
The energy-saving Sigma Profile airend
Single-stage, flooded rotary screw airends deliver pressures up to 217 psig and feature the power-saving Sigma profile design. Airends are precision-machined and optimized in size and profile to match the airend speeds with their best specific performance. Unlike the competition, Kaeser Compressors makes many different airends so that we can apply them at their optimal speed and performance.
Energy-saving one-to-one drive
The motor is directly connected to the airend with a one-to-one coupling, providing maximum transmission efficiency. This true direct drive eliminates complex gear drive components, along with heat and power losses. It is also maintenance-free, increasing reliability and uptime.
Sigma Control 2
The compressor control system features an industrial-based PC with update capabilities, Intel® microprocessor, and real-time operating system. Pre-loaded control profiles are available to precisely match compressor performance to air demand. A convenient SD card slot enables easy software upgrades and stores key operational parameters to minimize service costs, provide back-up capabilitiy, and offer long-term data storage for trending and analysis purposes.
Premium efficiency drive motor
Super premium efficiency TEFC motors with class F insulation for extra protection from heat and contaminants. 460 or 575V 3-phase, 60 Hz. Other voltages are available.
Split cooling design
Two separate cooling air inlet zones for the coolers and drive motor ensure optimum cooling. Drawing ambient air directly across the coolers and motor through separate zones eliminates pre-heating and results in longer lubricant life and a cooler running motor. This also results in much lower approach temperatures, improving moisture separation and air quality.
Fitting in with the industrial application of this building we have one wall where we built a very organized combination work table which is task lighted and has pegboard on back to hang all your tools and keep them organized and has several within reach 120 volt receptacles. This combination work table also provides above head multi level pallet rack storage with screen deck so no usable space is wasted. This storage is perfect all sorts of parts and inventory. We also will provide a rolling ladder so you have access to the upper shelves.
The true beauty of this property is not only does it have a well laid out efficient building but it has a huge fenced in lot that has been graveled allowing for hundreds of uses and different types of business's that require a large amount of outside storage. Perfect for trucking industry and many others.
Lot Size 2.68 Acres 292 ft Wide by 400ft Long
Fenced Portion Completely Graveled 1.81 Acre 230W x 343L
Lot Size 2.68 Acres 292 ft Wide by 400ft Long
Fenced Portion Completely Graveled 1.81 Acre 230W x 343L
Forklift available for rent as well.
To add to the efficiency of the building there is also a rooftop solar array capable of producing 26 KW of energy.
TENANT PAYS ALL UTILITIES AND RENT.
Willing to Build to Suit and Possibly add on for Long Term Lease
For Information call 314-721-6004 and ask for Rod
Willing to Build to Suit and Possibly add on for Long Term Lease
For Information call 314-721-6004 and ask for Rod
